Haron Air and Water Testing Kit

Connect to a tap to test the water pressure or connect to a test plug to air test PVC pipes. Pump the pipe with air via the valve. Comes with 1100KPA gauge, flexible connector, air test nipple and 1/2 to 3/4" conversion nut.

Haron Test Pump

6,000KPA test bucket with gauge measured in KPA, PSI and Bar.

10L powder coated gal tank with heavy duty 1.5m (5ft) hose.

Monument Manometres

Made from tough plastics, used for both testing pipework installations with air leaks before introduction of gas and for checking and setting correct gas pressures on domestic and commercial appliences Marked in Millibars, the scale adjusts to zero the water level.

Monument Air Testing Manometre Kit

This kit contains all the items required (with exception of test plugs), to carry out an air test to 100mm water gauge pressure (10mb) on any size of drain or pipe. Made from unbreakable parts, it will test up to 100mm water gauge pressure irrespective of the pipe diameter.

Monument Manometre

U-Gauge measured in Millibars up to 10mb

Monument Manometre Ballow

Hand bellow to suit Monument Manometers

Monument Test Plug Nipple Caps

Used to screw onto test plugs for air testing pipes using Manometres